Metal Roofing Projects in Ontario
Each project showcases our commitment to excellence and our ability to deliver tailored solutions that meet the highest standards. From concept to completion, we take pride in every step, ensuring that our clients' visions are brought to life with precision and care
We recently completed a European-style metal roof installation in Hamilton’s Liuna Court, replacing an aging shingle roof with a sleek and durable design that enhances both style and protection.
Roof Area
2,400 sq. ft.
Cost
16,000–19,000 CAD
Design
Monterey Metal Tile
In Ajax, we repaired leak-damaged plywood, sealed the roof with a Strotex Dynamic membrane, and completed a full metal roof installation using our double wood strapping system - always ensuring proper protection beneath the panels.
Roof Area
980 sq. ft.
Cost
6,000-7,500 CAD
Design
Monterey Metal Tile
MROOF completed this 16-unit condominium project in Mississauga, giving both buildings a clean, consistent appearance and a durable metal roofing system designed for long-term protection. The homeowners were very satisfied with the final result.
Roof Area
12,700 sq. ft.
Cost
80,000–85,000 CAD
Design
Monterey Metal Tile
MROOF replaced shingles that were blown off by strong winds in this area. The homeowners made a smart, worry-free choice by switching to a durable metal roof built to last.
Roof Area
2,030 sq. ft.
Cost
12,000-13,500 CAD
Design
Monterey Metal Tile
We recently completed a roof transformation for an elderly homeowner in Pickering, initiated by her son who wanted to ensure her house was protected from potential leaks.
Roof Area
1,650 sq. ft.
Cost
10,000–12,000 CAD
Design
Monterey Metal Tile
Old shingles led to a red metal roof upgrade, along with a proper skylight replacement to match the new system.
Roof Area
1710 sq. ft.
Cost
10,000-12,500 CAD
Design
Monterey Metal Tile
At MROOF, we recently completed a successful metal roofing installation on a duplex in Etobicoke.
Roof Area
2,700 sq. ft.
Cost
15,000–19,000 CAD
Design
Monterey Metal Tile
MROOF solved a serious roof leak around the solar panels that was flooding the kitchen. We removed the old system and installed a green metal roof with a Strotex Dynamic membrane for long-term protection.
Roof Area
3370 sq. ft.
Cost
20,000-22,000 CAD
Design
Monterey Metal Tile
This 1982 home had worn shingles around the solar panels. We installed a Standing Seam metal roof with a secure clip system that doesn’t require drilling into the metal and fixed the issue for good.
Roof Area
1950 sq. ft.
Cost
22,000-26,000 CAD
Design
Standing Seam Metal Roofing
For this new construction project, we installed a Modern metal roof on a tool shed as a test project. After a successful result, the same profile will be used on the main building.
Roof Area
700 sq. ft.
Cost
6,000-7,000 CAD
Design
Trapeze Metal Roofing
The MROOF team finished a beautiful metal roof installation that began during the winter season. With cold weather and active construction, the roof needed a carefully planned approach to protect the structure at the earliest stages and ensure a beautiful final result.
Roof Area
3,150 sq. ft.
Cost
20,000-24,000 CAD
Design
Monterey Metal Tile
During our initial inspection, the homeowner pointed out leakages in the garage area, especially along the wall.
Roof Area
2,550 sq. ft.
Cost
14,500–18,500 CAD
Design
Monterey Metal Tile
READY TO BECOME ONE OF OUR SATISFIED CLIENTS?
Let's Discuss Your Roof Project
1368 Blundell Rd, Mississauga, ON L4Y 1M5
Metal roofing projects in Ontario
Explore completed MROOF roofing projects and compare the profiles, colours and details shown. Each roof should be considered alongside its actual material specification, site conditions and installation scope.
Start with Standing Seam
Standing Seam is our main focus for clean architectural lines and concealed fastening. Ask MROOF for genuine Standing Seam examples relevant to your roof, and discuss the panel layout, transitions and exterior finish you prefer. Explore Standing Seam metal roofing.
Compare the actual roof profiles
Metal tile, metal shingles and Modern Metal Profile have their own appearance and installation requirements. Use the profile named on each project when comparing designs. A metal tile project should not be treated as a Standing Seam example.
Discuss the complete installation
A professional assessment connects the selected materials with roof preparation, flashing, ventilation, fastening and detailing. MROOF shares photos during installation and at completion so homeowners can follow the work and keep useful project records.
Contact our team to confirm service availability for your address and discuss suitable options for your property. Request an on-site assessment and written quote.